Home > Products > Elevator Flat Cable

 

Elevator Flat Traveling Cable

Technical Standards:

GB5023.6, IEC60227-6 EN50214

TVVB flat elevator cable
Rated voltage: 300/500V
Test voltage: 2500V
Minimum bending radius: 0.3m≤L≤0.6M
Used under the nomal conditions.the temperature of conductor is lower then 70

Click For Detail

TVVBG flat elevator cable with steel wire support
Rated voltage: 300/500V,Test voltage: 2500V
Minimum bending radius: 0.3m≤L≤0.6M
Used under the nomal conditions.the temperature of conductor is lower then 70
The outer sheath is extensively resistant to oil and cooling liquid

Click For Detail

TVVBP flat elevator cable with copper shielded
Rated voltage: 300/500V,Test voltage: 2500V
Minimum bending radius: 0.3m≤L≤0.6M
Used under the nomal conditions.the temperature of conductor is lower then 70
Conductor: Fine strands of bare copper wire, acc. to VDE 0295,class 5

Click For Detail

TVVBPG flat elevator cable with steel wire support and copper shielded
Rated voltage: 300/500V,Test voltage: 2500V
Minimum bending radius: 0.3m≤L≤0.6M
Used under the nomal conditions.the temperature of conductor is lower then 70
Insulation: special PVC
Sheath: flexible PVC , cold resistance, flame resistance

Click For Detail

Knowledge of elevator flat cable

Flexible traveling flat cable is a stranded conductor of multi-strand copper wire which wrapped with insulating material, through high-tech automation equipment production line and laminated the sheath material to make of flat cable, with soft, free bending fold, relatively thin, easy disassembly, and other advantages. Arbitrarily chosen number of wires and spacing, so that the connecting line is more convenient, greatly reduce the product volume can reduce production cost, improve production efficiency and is suitable for electrical equipment for data transmission cable and power transmission. You can choose any number of wires and spacing, so that the connecting wire cable is more convenient, it can reduce the product volume, reduce production cost, improve production efficiency and also it is suitable for electrical equipment for data transmission and power transmission. Common specifications are 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, 2.0mm, 2.5mm and other flexible cable spacing.

Structural characteristics of elevator flat cable:

1.The core wire of flat cable is soft structure, ensure good performance.
2.The insulation and protective layer materials are used to improve the soft properties of flat cables and the characteristics of corrosion resistance and cold resistance.
3.Insulated wire core has different color, for the convenience of flat cable laying installation.
4.According to customer needs, increase the wire rope or other load bearing components on both sides of the flat cable core
5.Coaxial cable can also be made into a flat cable for communication.